RION Europe Office product overview
APPLICATION

Vibration

Perform acceptance inspection on equipment to be installed

This is a measurement system for performing vibration measurements as part of acceptance inspection of newly installed machine equipment.

Perform acceptance inspection on equipment to be installed

This is a measurement system for performing vibration measurements as part of acceptance inspection of newly installed machine equipment.

Daily checking of equipment by operator

This is a system for vibration monitoring as part of a daily checking routine performed by an operator of machine equipment.

Use for maintenance of machine equipment

Regular vibration measurement is an important part of machine equipment maintenance routines. To monitor the equipment, values are compared to reference values, and if an increase is detected, checking is performed at shorter intervals. Detailed diagnosis can also be performed as necessary, to determine causes of vibration.

Perform detailed diagnosis of problem spots in a plant

Detailed diagnosis involves the use of FFT analysis to assess the type and extent of problem conditions, devise countermeasures etc.

Correct unbalance in rotating parts

Using a field balancer allows easy on-site correction of unbalanced conditions in rotational machinery.

Detect bearing problems

Trend management that monitors changes in acceleration is an effective method for detecting bearing problems. If acceleration values rise significantly, detailed diagnosis can be performed to investigate the type and extend of problems or damage.

Perform simultaneous diagnosis and waveform recording

In cases where on-site diagnosis combined with simultaneous vibration waveform recording for later detailed analysis in the lab is required, the 4-channel data recorder DA-21 or vibration analyzer VA-12 can be used.

Perform constant monitoring of machine vibrations in installed facilities

Serves for constant monitoring of machine vibrations in installed facilities.

Perform measurement of low-frequency vibrations

This setup is for measurement of vibrations with a frequency of 1 Hz or lower, which cannot be measured with a conventional accelerometer. It is suitable for measurement of vibrations in buildings and other large structures.

« 1 2 3 4 »
PAGETOP
Copyright © RION Co.,Ltd. All Rights Reserved.