Perform monitoring of microvibrations

The system is designed mainly for low-frequency microvibrations. The measurement frequency range is DC to approx. 100 Hz. The lower measurement limit is 10^-5 (m/s2) with the servo accelerometer LS-10C and 10^-6 (m/s2) with the LS-40C. When the LS-10C is connected to the general-purpose vibration meter VM-83, direct reading of acceleration, velocity, and displacement values for 0.1 Hz and above is possible. When the vibration waveform is output as AC voltage, a DC voltage output proportional to the vibration value can also be obtained.

The system is designed mainly for low-frequency microvibrations. The measurement frequency range is DC to approx. 100 Hz. The lower measurement limit is 10^-5 (m/s2) with the servo accelerometer LS-10C and 10^-6 (m/s2) with the LS-40C. The servo accelerometer power supply LF-20 can accommodate up to three LS-10C/40C units. Vibration waveform information is output as an AC voltage. A level recorder or A/D converter is therefore required to supply the output to a computer for data processing.