• EXAMPLE 1
  • EXAMPLE 2
  • EXAMPLE 3

- Supports direct and comparative measurement. Also allows reverberation time measurement.
- Supports multi-channel measurement and microphone rotator use.
- Simultaneous power level measurement for up to 32 channels possible (up to 8 channels for reverberation time measurement).

Supported Technical Standard / Law / Regulation
●ISO 3741:2010 Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Precision methods for reverberation test rooms

PRODUCT LIST

MODEL PRODUCT NAME REMARKS
Microphone UC-59 or UC-59T 1~32units
Preamplifier NH-22 1~32units
UA-90 1/2inch Microphone holder 1~32units
Microphone stand 1~32units
SA-02M Multi-Channel Signal Analyzer
Connecting kit
NC-74 / NC-72A Sound calibrator / Pistonphone
AS-31PA5 Anechoic Acoustic Power Level Measurement Software
Computer
Speaker

- Measures the 1/3 octave band acoustic power level according to the semi-anechoic measurement method.
- The sound pressure level at measurement points on a virtual measurement surface (hemispheric or parallelpiped surface) installed in a semi-anechoic room is measured, and background noise correction for the sound pressure level of the sound source is performed. The flat-response and A-weighted acoustic power levels are then determined.

Supported Technical Standard / Law / Regulation
●ISO 3745:2003 Acoustics -- Determination of sound power levels of noise sources using sound pressure -- Precision methods for anechoic and hemi-anechoic rooms
●ISO 3744:2010 Acoustics -- Determination of sound power levels and sound energy levels of noise sources using sound pressure -- Engineering methods for an essentially free field over a reflecting plane

PRODUCT LIST

MODEL PRODUCT NAME REMARKS
Microphone UC-59 or UC-59T 1~10~20units
Preamplifier NH-22 1~10~20units
EC-90 Series Microphone extension cable 1~10~20units
UA-90 1/2inch Microphone holder 1~10~20units
Microphone Installation jig
SA-02M Multi-Channel Signal Analyzer 1~2units
AS-30PA5 Semi-Anechoic Acoustic Power Level Measurement Software
Computer
NC-74 / NC-72A Sound calibrator / Pistonphone

Using the Low-Noise Microphone UC-35P in a hemi-anechoic chamber in conjunction with the Frequency Analyzer SA-02 and
the Hemi-Anechoic Acoustic Power Level Measurement Software AS-30PA5 enables measurement of acoustic power levels of low-noise products.

PRODUCT LIST

MODEL PRODUCT NAME REMARKS
UC-35P 1 inch sound field type electret microphone (with preamplifier)
SA-02M (12ch) Multi-Channel Signal Analyzer
AS-30PA5 Hemi-Anechoic Sound Power Level Measurement Software
NC-74 Sound Calibrator
EC-90 Series BNC-BNC Coaxial Cable